DT340 - B7 Tracking unit is a developed vehicle tracking unit which provides customers the most extensive use of Mobiliz Tracking System with more accessory connection option. Hence, it is possible to produce additional reports that customers may need along with various accessories. It is offered together with latest GPS satellite receiver technology providing highly sensitive location information.

DT340 - B7 Tracking unit Technical Specifications are as below:

OTA (Over-The-Air) programming:

All parameters are fully configurable from remote.

OTA (Over-The-Air) firmware upgrade:

Full remote firmware upgrade for efficient and faster customer support and enhancement of service offering.

Geo-fence memory:

500 Geo-fences and waypoints can be programmed.

Offline memory:

34.000 offline message can be stored when out of GSM coverage and transmitted when the connection is re-established.

Server Authentication:

The unit can be programmed to support communication only to / from authorized servers with DNS support.

Spare Server Support:

The unit can be programmed to a spare server if the communication is not establish the main server.

Communication

Bands Quad Band 850, 900, 1800, 1900 MHz

GSM Modes GPRS Class 12

Power Output 2 W, 1 W

Antenna Internal quad band GSM antenna

Packet Data TCP/IP, FTP, SMS, UDP, HTTP, PPP, MMS

SIM Internal, replaceable SIM card

Location Cell ID based location support

GPS

Technology SIRF IV chipset

Sensitivity

Autonomous Acquisition - 148 dBm

Tracking - 163 dBm

Reacquisition – 160 dBm

Reacquisition Time < 1sec

TTFF (Time to First Fix)

Cold Start < 35sec

Warm Start < 35sec

Hot Start < 1sec

Receiving Channels 48 channels

Accuracy

Autonomous < 2.5 m CEP

SBAS < 2 m CEP

Inputs

1 positive trigger input dedicated for ignition switch.

3 Positive trigger, and 2 negative trigger general purpose inputs.

Outputs

3 outputs (1 output is for external immobilizer relay connection)

Interfaces

COM port Selectable baud rate (9600, 19200, 38400, 57600 or 115200bps) - UART TTL levels; Transparent data mode

I²C bus or 1-Wire™ interface For I²C bus; master device, clock (SCL) speed up to 100 KHz, internally pulled-up. For 1-Wire™, it is Dallas DS1990A compliant.

CAN Physical Layer (SN65HVD230) Compatible with the requirements of ISO 11898 Standard, J1939 compatible, FMS compatible

Voice Interface 1 microphone and 1 speaker input with full dublex hands free feature, and distress voice call.

Power

Input voltage 8 – 36 VDC

Power consumption <1 W

Internal Battery (optional)

Li Polymer/Li-Ion, 3.7V, 1100mAh rechargeable, Charging 0 / +45 °C, Discharging -20 / +45 °C

Li Polymer/Li-Ion, 3.7V, 1700mAh rechargeable, Charging 0 / +45 °C, Discharging -20 / +45 °C

Dimensions & Weight

Dimensions 95x80x25 mm

Weight 87,5 gr (without battery)

Environment

Temp, operating -40°C to +85°C without battery and SIM card

Certifications

e-Mark, e13, CE, ISO 9001:2008, ISO 14001:2004, ISO 27001:2005

CANbus interface is available only in the CANbus product package.

Başarsoft - Service Route Management System